SXG Model Automatic Caustic Soda Sawdust Air Flow Spin Flash Dryer Manufacturer

Principio básico

Hot air in a tangential direction enters the bottom of the rotary flash dryer and forms a strong rotational Windfield under the action of the stirrer. The materials get into the drying equipment from a screw feeder, under the strong effect of the high-speed rotating impeller, the materials are dispersed after being rubbed and sheared. Bulk materials are quickly crushed and fully contacted with the hot air to complete drying. Dehydrated dry materials rise with the hot air, the grading ring will retain the large particles and the small ones will be excluded from the rotating flash drying machine through the ring center. The cyclone separator and dust remover will recover these materials. The wet or bulk materials will be thrown to the container wall by centrifugal force, and fall into the bottom of the flash dryer to be crushed and dried again.

SXG rotating flash drying machine is our newly developed drying equipment, with advanced technology. reasonable design, compact structure, large production capacity, and energy efficiency. This rotary flash dryer can complete drying, smashing, and screening in a single step. Equipped with a special magnetic sealing device, it meets the GMP standards.

Características principales
1) SXG rotating flash drying machine is equipped with a special cooling device at the bottom, thus avoiding
material deterioration due to high temperature.
2) Wind distribution device can reduce the resistance to drying equipment and provide air volume for the dryer3) This rotary flash dryer uses a particular pressurized sealing device and bearing cooling device to effectively
prolong the service life of the drive part.
4)Material fineness and final moisture content can be adjustable5) Short staying time of material can prevent the material from sticking to the wall and the thermosensitive material from deteriorating